ATEX Scales

Here you will find a range of ATEX Scales for use in Hazardous Areas. We are specialists in supplying ATEX weighing systems and manufacture a range of bespoke weighing platforms to suit. We supply equipment from prestige manufacturers such as Dini Argeo, MWS and Shinko Denshi.

ATEX Scales

Set Descending Direction
View as Grid List

Items 1-16 of 23

Page
per page
  1. LPS ATEX Zone 1/21 Floor Scale

    Starting at £3,409.00 £4,090.80

    Add to Compare
  2. DTS ATEX Low Profile Scale for Zone 1/21

    Starting at £3,597.00 £4,316.40

    Add to Compare
  3. HW CEP IP65 ATEX Scale - Zone 1 & Zone 2

    Starting at £1,185.00 £1,422.00

    Add to Compare
  4. ATEX Scale System - 1250 x 1250mm
    -15%
    IBC Floor Scale - ATEX Zone 1/21 - Mains Powered
    Special Price £4,004.00 £4,804.80 Regular Price £5,653.20
    Add to Compare
  5. ATEX Scale System - 1250 x 1250mm
    -17%
    IBC Floor Scale - ATEX Zone 1/21 - Battery Powered
    Special Price £3,897.00 £4,676.40 Regular Price £5,653.20
    Add to Compare
  6. DPS/EX Pit Mounted ATEX Floor Scale

    Starting at £0.00 £0.00

    Add to Compare
  7. Easy Pesa 3GD - Zone 2/22 Bench Scale

    Starting at £1,877.00 £2,252.40

    Add to Compare
  8. Easy Pesa 2GD - Zone 1/21 Bench Scale

    Starting at £2,277.00 £2,732.40

    Add to Compare
  9. DTS ATEX Low Profile Scale

    Starting at £2,920.00 £3,504.00

    Add to Compare
  10. MCWX2GD ATEX Crane Scale

    Starting at £4,147.00 £4,976.40

    Add to Compare
  11. LPS ATEX Floor Scale

    Starting at £2,200.00 £2,640.00

    Add to Compare
  12. TPWX3GD - ATEX Pallet Truck Scale - Zone 2 & 22

    Starting at £2,287.00 £2,744.40

    Add to Compare
Set Descending Direction
View as Grid List

Items 1-16 of 23

Page
per page

When you buy an ATEX scale from Scalesmart you can rest assured that you have made the right choice, we can provide full documentation for ATEX approvals and certification of conformity when requested.

The ATEX Directives:

The ATEX Directive 94/9/EC (also known as Article 100a and Article 95) outlines the requirements suppliers must meet to achieve compliance for their equipment and protective systems for use in hazardous areas. It applies to both electrical and mechanical equipment and covers potentially explosive areas below ground, on the surface and on offshore fixed facilities. 94/9/EC was originally implemented in the UK by The Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres Regulations (SI 1996 No.192) which came into force on 1 March 1996. These Regulations have been amended by the Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres (Amendment) Regulations 2001 (SI 2001 No.3766) which came into force on 21 December 2001. The amendment principally covers the concept of “putting into service”.

The ATEX Workplace Directive 1999/92/EC (also known as Article137) covers the health and safety aspects of workers potentially at risk from exposure to explosive atmospheres. The Directive places the onus on the end user to ensure measures are taken to ensure the safety of employees.

This Directive is implemented in the UK by the Dangerous Substances and Explosive Atmospheres Regulations (DSEAR). Employers had an obligation under law to complete a formal risk assessment of all hazardous areas within their company by 30th June 2006.

ATEX Zones:

Zone 0 (gases / Vapors)An area in which an explosive mixture is continuously present or present for long periodsClass I Division 1 (gases)
Zone 1 (gases / Vapors)An area in which an explosive mixture is likely to occur in normal operationClass I Division 1 (gases)
Zone 2 (gases / Vapors)An area in which an explosive mixture is not likely to occur in normal operation and if it occurs it will exist only for a short time.Class I Division 2 (gases)
Zone 20 (dusts)An area in which an explosive mixture is continuously present or present for long periodsClass II Division 1 (dusts)
Zone 21 (dusts)An area in which an explosive mixture is likely to occur in normal operationClass II Division 1 (dusts)
Zone 22 (dusts)An area in which an explosive mixture is not likely to occur in normal operation and if it occurs it will exist only for a short time.Class II Division 2 (dusts)