Skip to Store Area:

Scalesmart - Industrial weighing Scales


Subscribe to RSS Feed

ATEX Scales

Here you will find a range of ATEX Weighing Scales for use in Hazardous Areas. We are specialists in supplying ATEX weighing systems and manufacture a range of bespoke weighing platforms to suit. We supply equipment from prestige manufacturers such as Dini Argeo, MWS and Shinko Denshi.

7 Item(s)

per page

Grid  List 

Set Descending Direction
TPWX3GD - ATEX Pallet Truck Scale - Zone 2 & 22
Starting at: Ex. VAT: £1,550.00 In. VAT: £1,860.00
Add to Cart

Stainless Forks Not Included - Cost Option


Pallet truck scales, with built-in electronic weighing, suitable for harsh working conditions and dangerous areas classified as hazardous (ZONE 2, 22) in accordance with Ex II 3GD IIC T6 T130°C X protection. The ATEX certified four load cell weight detection guarantees the best accuracy in all work conditions. The stainless steel forks shown in the picture are an optional extra and must be specfified if there is a possibilty of them coming into contact with other metals or walls etc Available also CE-M APPROVED.

Learn More
TPWX2GD - ATEX Pallet Truck Scale - Zone 1, 21, 2 & 22
Starting at: Ex. VAT: £2,000.00 In. VAT: £2,400.00
Add to Cart
Pallet truck scales, with built-in electronic weighing, for dangerous areas classified as hazardous (ZONES 1 and 21 & 2 and 22) in accordance with Ex II 2GD IIB T4 T197°C X. The ATEX certified four load cell weight detection IP68 guarantees the best accuracy in all work conditions. The stainless steel forks shown in the picture are an optional extra and must be specified if there is a possibilty of them coming into contact with other metals or walls etc
Available also CE-M APPROVED. Learn More
MCWX2GD ATEX Crane Scale
Starting at: Ex. VAT: £2,595.00 In. VAT: £3,114.00
Add to Cart

Industrial crane scales for use in areas classified as hazardous (Zone 1 and 21, 2 and 22) in accordance with Ex II 2GD IIC T4 T197°C X protection.
Structure completely in stainless steel, with IP68 protection degree. LITTLE SPACE IS TAKEN UP allowing the best use of the lifting devices. Predisposed for an upper connection ring and lower hook

Learn More
DPS/EX Pit Mounted ATEX Floor Scale
Starting at: Ex. VAT: £2,695.00 In. VAT: £3,234.00
Add to Cart
Our UK manufactured DPS pit mounted scales are designed to be sunk into the ground making weighing a simple, safe and fast procedure, the DPS is rated for use in all hazardous areas, designed and manufactured in Leicester by our parent company MWS Ltd the DPS/EX range is fitted with high quality load cells from Flintec, the finish as standard is glass bead blast, however we can supply with an electro polished finish for the ultimate in hygiene. Learn More
FLTS/EX - Portable ATEX Scale
Starting at: Ex. VAT: £2,995.00 In. VAT: £3,594.00
Add to Cart

Low profile floor scale designed to be moved by a fork lift truck. Ideal for weighing barrels and IBC containers. Designed and manufactured by MWS Ltd in Leicester

Platform Size : 1250 x 1250mm
Height : 95mm

Areas of use :
• Pharmaceutical Areas
• Chemical Production

Learn More
TPWX3GDI - ATEX Pallet Truck Scale - Zone 2 & 22
Starting at: Ex. VAT: £4,195.00 In. VAT: £5,034.00
Add to Cart

Pallet truck scales, with built-in electronic weighing, suitable for harsh working conditions and dangerous areas classified as hazardous (ZONE 2, 22) in accordance with Ex II 3GD IIC T6 T130°C X protection.

The weight detection made with four Atex certified IP68 stainless steel load cells guarantees the precision in all work conditions.

Learn More
TPWX2GDI - ATEX Pallet Truck Scale - Zone 1, 21, 2 & 22
Starting at: Ex. VAT: £4,495.00 In. VAT: £5,394.00
Add to Cart

Pallet truck scales, with built-in electronic weighing, suitable for harsh working conditions and dangerous areas classified as hazardous (Zone 1, 21, 2, 22) in accordance with Ex II 2GD IIB T4 T197°C X protection.

The weight detection made with four Atex certified IP68 stainless steel load cells guarantees the precision in all work conditions.

Learn More

7 Item(s)

per page

Grid  List 

Set Descending Direction

When you buy an ATEX scale from Scalesmart you can rest assured that you have made the right choice, we can provide full documentation for ATEX approvals and certification of conformity when requested.

The ATEX Directives:

The ATEX Directive 94/9/EC (also known as Article 100a and Article 95) outlines the requirements suppliers must meet to achieve compliance for their equipment and protective systems for use in hazardous areas. It applies to both electrical and mechanical equipment and covers potentially explosive areas below ground, on the surface and on offshore fixed facilities. 94/9/EC was originally implemented in the UK by The Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres Regulations (SI 1996 No.192) which came into force on 1 March 1996. These Regulations have been amended by the Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres (Amendment) Regulations 2001 (SI 2001 No.3766) which came into force on 21 December 2001. The amendment principally covers the concept of “putting into service”.

The ATEX Workplace Directive 1999/92/EC (also known as Article137) covers the health and safety aspects of workers potentially at risk from exposure to explosive atmospheres. The Directive places the onus on the end user to ensure measures are taken to ensure the safety of employees.

This Directive is implemented in the UK by the Dangerous Substances and Explosive Atmospheres Regulations (DSEAR). Employers had an obligation under law to complete a formal risk assessment of all hazardous areas within their company by 30th June 2006.

ATEX Zones:

Zone 0 (gases / Vapors)An area in which an explosive mixture is continuously present or present for long periodsClass I Division 1 (gases)
Zone 1 (gases / Vapors)An area in which an explosive mixture is likely to occur in normal operationClass I Division 1 (gases)
Zone 2 (gases / Vapors)An area in which an explosive mixture is not likely to occur in normal operation and if it occurs it will exist only for a short time.Class I Division 2 (gases)
Zone 20 (dusts)An area in which an explosive mixture is continuously present or present for long periodsClass II Division 1 (dusts)
Zone 21 (dusts)An area in which an explosive mixture is likely to occur in normal operationClass II Division 1 (dusts)
Zone 22 (dusts)An area in which an explosive mixture is not likely to occur in normal operation and if it occurs it will exist only for a short time.Class II Division 2 (dusts)