Skip to Store Area:

Scalesmart - Industrial weighing Scales


Parts Counting Scales

Why count parts by hand? It is boring, time consuming and prone to human error. Counting scales are the answer. They offer efficiency and elimination of high labour cost. The counting scale will pay for itself in no time. Before choosing a parts counting scale suitable for your operation, it is necessary to do a bit of homework. This is because in order to offer the best solution, we need to know the spread of weights which you need to count; sometimes it will be necessary to have more than one scale to get the best accuracy.

6 Item(s)

per page

Grid  List 

Set Descending Direction
ASC Counting Scales
Starting at: Ex. VAT: £175.00 In. VAT: £210.00
Add to Cart
Counting scale, particularly suitable for taking inventories and counting small parts. Weight or piece quantity check, weight and pieces' totalisation, 10 PLU memory. Available also CE-M APPROVED for legal for trade use. Learn More
BCS Counting Scale
Starting at: Ex. VAT: £175.00 In. VAT: £210.00
Add to Cart

The BCS has been replaced by this model - ASC Counting Scale

Learn More
Kern CFS Counting Scale
Starting at: Ex. VAT: £209.00 In. VAT: £250.80
Add to Cart
Professional counting balance with 100 item memories and second balance interface, counting resolution 60,000 points Learn More
Weigh Beam Counting System - 2000Kg x 0.2Kg
Ex. VAT: £495.00 In. VAT: £594.00
Add to Cart
This counting scale system feature a set of weigh beams for counting pieces on pallets or in crates, a PreSet TARE can be deducted via the 0-9 keypad when counting in full containers, or a basic TARE function can be done when empty containers are loaded on to the weigh beams. Learn More
Floor Scale Counting System - 3000Kg x 0.5Kg
Ex. VAT: £595.00 In. VAT: £714.00
Add to Cart

This counting scale system feature a set of floor scales for counting pieces on pallets or in crates, a PreSet TARE can be deducted via the 0-9 keypad when counting in full containers, or a basic TARE function can be done when empty containers are loaded on to the weigh beams.


Platform : 1200 x 1200mm
Capacity : 3000 Kg
Division : 0.5 Kg 

Learn More
WPY Mutli Function Scales
Starting at: Ex. VAT: £1,090.00 In. VAT: £1,308.00
Add to Cart

Multifunctional weighing system with the following capabilities. Added functionality with connection the to the E2R software application, ideal for customers who have large product databases or multiple scales across a site, the E2R application becomes a central database that controls the whole network and stores the information in one location. Communication via Ethernet for networking the systems could not be simpler.

Contact us to request a site visit and demonstration of this system.

Functionality:
Parts Counting, Totalising, Filling, Checkweighing, Barcode Labelling, Statistics, Formulation

Learn More

6 Item(s)

per page

Grid  List 

Set Descending Direction

This will depend to some extent on the value of the parts being counted; the more expensive they are, the more accurate you need to be. Scalesmart can help you here by offering to work this out for you. We offer a service whereby you can send in a representative sample of your parts, and we will accurately obtain the "average piece weight". We use the figures obtained to decide which is the best range of scales to offer.

It is most important to get this figure right, as it is used in the division process to display the count; quite simply, the number of pieces you have on the scale is worked out by dividing the net weight on the scale (after taking into account the container, which if used, is "tared off") by their average piece weight calculated by the scale. This calculation is obtained by placing a known number (say 10) on the scale, telling the scale there are 10 parts on it, and pressing the sample key; the calculation is then performed automatically and stored in memory From then on, the scale will show the number of pieces using the figures it has worked out. to weigh/count another part, you repeat the sampling process. The sample size required is determined either by calculation or by trial and error; it depends on the variation in average piece weight.

This need not be a daunting task however, as some of the parts counting scales have what is called "average piece weight enhancement". This is done by sampling the first 10, counting out 10 more using the scale to do this, and pressing the sample key again, whereby it will re-calculate using 20 parts; this will "enhance" the original figure (the more parts the better being the moral here) Scalesmart offer AnD, Kern & Sohn, MWS and Ohaus counting scales specifically for counting parts.