DGT100 Weight Repeater / Indicator
Weight indicator/ repeater with large matrix display composed of very intense bright LEDs. Particularly suitable for outdoor uses, it is clearly visible even in full sunlight and where it's necessary to view from a distance at any angle. Case completely in IP68 stainless steel. CE-M approved (OIML R-76 / EN 45501). MID approved (OIML R-61).Unless stated you will always need to add Radio modules to the scale and the DGT100 if you wish to communicate as a wireless solution for repeater to work with any crane scale or terminal wirelessly. Please contact us for advice.
£720.00 £864.00
Main Features:
• Functional 5-key waterproof keypad.
• Large 6-digit display, 100 mm high, with very efficient SMD LEDs, complete of 6 Leds for indication of active functions, visible from over 25 m, with viewing angle up to 120° and with power up to 750 mcd.
• Software adjustment of the brightness intensity by keyboard.
• AISI 304 stainless steel case with IP68 protection complete of wall fixing bracket.
• Fitted with an anti condensation air valve for regulating the humidity and the pressure inside the indicator.
• Calibration, Set-Up parameters, configurable from keyboard or from PC with DINI TOOLS.
• Max. 10.000e or multirange 2 x 3000e @ 0,3 µV/d in CE-M approved version for legal for trade use.
• Max. 1.000.000 displayable divisions viewable with internal resolution up to 3.000.000 points.
• Up to 8 signal linearisation points with DINITOOLS.
• A/D 24 bit sigma-delta 4-channel conversion, max.200 conv./sec. with automatic selection.
• Connectable with up to 8 analogue load cells with 350 Ohm input resistance.
• Management of a weighing system with up to 4 cells with digital equalisation or management of up to 4 independent weighing systems.
• Power supply from 12 to 24 Vdc with 110-240 Vac internal power supplier.
• Available as Scale or as Repeater version.
| Communication | RS232, RS485, WiFi, Ethernet, Wireless RF |
|---|---|
| Display | Large 6-digit display, 100 mm high, with very efficient SMD LEDs |
| Power Requirements | Power supply from 12 to 24 Vdc with 110-240 Vac internal power supplier. |
| IP Rating | IP68 |
Write Your Own Review
