CPA20000 Low Profile Compression Load Cells

• OIML C3 precision class
• Low profile 
• Great resistance to lateral forces
• Stainless steel construction
• IP68 protection 
• Capacity: 20000kg
• Shielded connection cable up to 90°C
• Test certificate available upon request 

• Minimum load cell verification interval: Vmin = EMax / 10000
• Full Scale Output: 2mV/V +/- 0,1% (1,3mV/V for CPA150)
• Repeatability: 0,01% F.S.
• Combined Error 0.025% Emax (≤10t), 0.05% Emax (≥20t)
• Temperature effect on zero: 0,0014% /°C
• Temperature effect on full scale output: 0,0013% /°C
• Compensated Temperature Range: -10°C/+40°C
• Operating Temperature Range: -30°C/+60°C
  
  • * Upon request up to 200°C
• Creep error after 4 hours: 0,03% F.S.
• Maximum tolerated excitation voltage: 15 Vdc
• Input Resistance: 1100 ± 50 Ohm
• Output Resistance: 1000 ± 10 Ohm
• Zero Balance: ± 2% F.S.
• Insulation Resistance: >5000 MOhm
• Safe Overload: 150% F.S.
• 6-wire shielded cable, 5 mm diameter:
  
  • 10 m long for the versions from 150 up to 10000kg
  • 10 m long for the versions from 20000 to 50000kg

The CCATEX certificate makes the load cell suitable for use in hazardous areas with protection methods according to:

• ATEX II 1G Ex ia IIC T6 (Ta -20÷+40ºC) TX (Ta -20÷+65ºC)
• ATEX II 1D tD A20 TXºC (Ta -20÷+40ºC) TXºC (Ta -20÷+65ºC).

The certificate includes the manual and the ATEX CE conformity declaration (available in EN, DE, FR, and IT).

The CCATEX certificate is issued after the checks done by qualified technicians, with the help of specific equipments, for each load cell.

IMPORTANT: the certificate refers to the single load cell. For systems with more load cells, it is necessary to order one certificate for each load cell.