, 
T95-10T Tension Load Cell
Built for high accuracy applications.The T95 tension stainless steel load cell is most suitable for high accuracy applications where movement or vibration is present, e.g. mixers, agitators, catalyst vessels, weighing platforms, axle weighers and vehicle weigh-in-motion (WIM) systems.The T95 load cell is also available with ATEX and IECEx approval certification for all gas and dust zones. Barriers are not required for use in gas zone 2 or dust zones 20, 21, 22.
£525.00 £630.00
- Stainless steel load sensor
- Fully welded and hermetically sealed construction to IP68/IP69K
- Simple installation
- Load cell is always in tension
- OIML C3 (3000 divisions) approval
- OIML certificate available upon request
- Ideal in mixer and vibrating applications
- Load Cell Capacities (Emax): 10000 kg (2000, 5000 kg on request)
- Accuracy Class: 3000 n.OIML
- Rated Output (Sn): 2 mV/V ± 0.25%
- Combined Error: < ± 0.017 % Sn
- Non-repeatability: < ± 0.015 % Sn
- Temperature Effect on Zero Balance: < ± 0.002 % Sn / ˚C
- Temperature Effect on Span: < ± 0.0012 % Sn / ˚C
- Compensated Temperature Range: -10 to +40 ˚C
- Operating Temperature Range: -40 to +80 ˚C
- Safe Overload: 150 % Emax
- Ultimate Overload: 300 % Emax
- Zero Balance: < ± 2 % Sn
- Input Resistance: 380 Ω ± 30
- Output Resistance: 350 Ω ± 5
- Insulation Resistance: > 5000 MΩ @ 100V
- Recommended Supply Voltage: 5 - 15 V
- Maximum Supply Voltage: 15 V
- Environmental Protection: IP68 / IP69K
- Cable: 10 m lenght, 5.7 mm diameter, polyurethane material
- Nominal Shipping Weight - load cell: 4 kg
ATEX AND IECEx VERSION UPON REQUEST
The T95 load cell has a number of ATEX and IECEx certification options.
| Class | C3 |
|---|---|
| Max (kg) | 10000kg |
| ATEX Option | Optional |
| Cable Length | 10m |
| IP Rating | IP69K |
Write Your Own Review
