Stainless steel compression load cells suitable for weighing tanks and hoppers with the relevant accessories.
Supplied in a kit of four IP68 compression load cells, four stainless steel compression mounts and a IP67 junction box.
These kits can be interfaced with a wide range of scale terminals, please call us for advice.
Total System Load (Inc Tank / Vessel Dead Load)
For system advice please call our experienced process weighing team.
Starting at £1,497.00 £1,796.40
Full Scale Output: 2mV/V +/- 0,5%
Non-Repeatability: 0,01% F.S.
Temperature effect on zero: 0,02% / 10°C
Temperature effect on full scale output: 0,02% / 10°C
Compensated Temperature Range: -10°C/+50°C
Operating Temperature Range: -20°C/+60°C
Creep error after 30 minutes: 0,02% F.S.
Maximum tolerated excitation voltage: 10 VDC
Input Resistance: 750 ± 10 Ohm
Output Resistance: 700 ± 5 Ohm
Zero Balance: +/-1% F.S.
Insulation Resistance: >5000 MOhm
Safe Overload: 120% F.S.
4-wire shielded cable, 5 mm diameter:
|Cable Length||5 Mtrs|
|Safe Overload||120% F.S|
|Output mv/V||2mV/V +/- 0,5%|